Meteorology & Hydrology

Temperature, Humidity & Pressure

A passive 4-wire Pt100 air temperature probe with 0.1 °C accuracy, usable indoors as supplied or outdoors inside a radiation screen for meteorological work.

 

A slim plate-type Pt100 probe for measuring the temperature of surfaces such as photovoltaic modules, walls or floors, fixed with adhesive or thermal paste.

sensori-LSI-LASTEM-4

A matt-black copper globe thermometer built to ISO 7726 for measuring radiant (globe) temperature, the key input for WBGT heat stress and comfort indices.

sensori-LSI-LASTEM-8

A naturally ventilated wet bulb thermometer with a large reflective water reservoir, designed to ISO 7726 for WBGT heat stress monitoring indoors and outdoors.

sensori-LSI-LASTEM-9

Combined air temperature and relative humidity probes for weather stations, offered with Pt100/0-1 V, 4-20 mA or RS485 Modbus outputs and natural or fan-ventilated radiation screens.

download (44)

A battery-powered temperature and humidity probe that transmits over 868 MHz radio, removing cables between the sensor and the weather station logger.

sensori-LSI-LASTEM-46

A high-accuracy outdoor sensor measuring air temperature, relative humidity and barometric pressure in one probe, with an interchangeable sensing head and analogue or serial outputs.

download (45)

Meteorological barometers from a compact 0-1 V logger sensor to a WMO/ICAO-grade digital instrument with 0.15 hPa accuracy and QNH, QFE and QFF outputs for aviation.

sensori-LSI-LASTEM-74

Wind

Solid-state 2-axis sonic anemometers with no moving parts, measuring wind speed to 60 m/s (85 m/s high-speed version) and direction to ±2°, with RS485 Modbus, RS232 or 4-20 mA output and heated options.

 

A three-dimensional sonic anemometer measuring all three wind components plus sonic temperature, with ±1 % speed and ±1° direction accuracy and Modbus-RTU output for turbulence and flux studies.

download (46)

Wind speed and direction in one compact aluminium unit, with cup and vane transducers, 75 m/s survival rating and a choice of frequency/0-1 V, 4-20 mA, 0-5 V or RS485 Modbus outputs.

sensori-LSI-LASTEM-54

A passive, zero-power three-cup anemometer with a reed-switch pulse output, built in anodised aluminium with Luran cups for wind farms and long unattended deployments.

sensori-LSI-LASTEM-62

Professional three-cup wind speed sensors with a 32-sector optical encoder for low threshold and fine resolution, in frequency or analogue output versions with heated options for icy climates.

sensori-LSI-LASTEM-62

A compact anodised aluminium wind vane with a magnetic encoder giving a full 0-360° reading as a 0-1 V signal, built for wind farms, light weather stations and wind alarms.

sensori-LSI-LASTEM-60

Professional wind vanes with a precision encoder, low delay distance and sealed bearings, offered with 0-1 V, 0-5 V, 0/4-20 mA outputs and heated versions for icing climates.

sensori-LSI-LASTEM-60

A dedicated sensor for the vertical component of the wind, used alongside conventional anemometers to study updraughts, downdraughts and atmospheric stability.

Tacoanemometro-verticale-PRWSA4030-1

Rain, Snow & Weather Phenomena

Aluminium tipping-bucket rain gauges to WMO guidance with 0.2 mm or 0.1 mm resolution, Class A intensity accuracy to UNI EN 17277, siphon and heated options, and pulse, 4-20 mA or Modbus output.

A heated capacitive rain detector that distinguishes genuine rainfall from dew and condensation and closes a relay contact as soon as rain begins.

sensori-LSI-LASTEM-85

A lightweight double-sided conductivity sensor that detects and times the presence of water on leaf surfaces, a key indicator of plant disease risk.

AnyConv.com__DQA057.1-2-scaled

An ultrasonic snow depth sensor with built-in temperature compensation that also reports snowfall intensity and start time, with 4-20 mA and RS485 Modbus outputs.

sensori-LSI-LASTEM-2024-04-03T101443.407

A lightning detector that senses the electromagnetic emissions of cloud-to-ground and intra-cloud flashes and estimates the distance to the approaching storm front from 40 km down to 5 km.

sensori-LSI-LASTEM-84

Forward- and back-scatter optical sensors that measure meteorological optical range from 10 m up to tens of kilometres, with present-weather models that also classify fog, rain, snow and drizzle.

download (47)

WMO Class A stainless-steel evaporation pan with a piezometric water-level sensor and optional automatic refill, giving continuous evaporation measurement when paired with an LSI LASTEM data logger.

sensori-LSI-LASTEM-95

An optical fine-dust sensor measuring PM1, PM2.5 and PM10 simultaneously with automatic zero correction, designed to add particulate data to weather stations over RS485 Modbus.

sensori-LSI-LASTEM-34

Solar Radiation

ISO 9060:2018 spectrally flat Class A (secondary standard) pyranometers for global irradiance with 2% daily uncertainty, available with microvolt or RS485 Modbus output and optional heating and ventilation.
 

ISO 9060:2018 spectrally flat Class B (first class) thermopile pyranometers with 5% daily uncertainty, offered with microvolt, 4-20 mA or RS485 Modbus outputs.

sensori-LSI-LASTEM-2024-04-03T100744.201

ISO 9060:2018 Class C (second class) thermopile pyranometers for routine solar monitoring, with microvolt, 4-20 mA or RS485 Modbus output and 10% daily uncertainty.

Pyranometers

Non-tracking rotating-band sensor that measures direct solar radiation and reports sunshine status to the WMO 120 W/m2 definition, with built-in anti-condensation and defrosting heaters.

sensori-LSI-LASTEM-72

Broadband photodiode radiometers for atmospheric UV-A (315-400 nm) and UV-B (280-315 nm) irradiance, calibrated under the sun with ISO 17025 traceability and 4-20 mA output.

sensori-LSI-LASTEM-71

IP66 outdoor illuminance sensor covering 0-150 klx with a photodiode filtered to the CIE photopic curve, suited to long-term daylight and lighting measurements.

sensori-LSI-LASTEM-18

Thermopile net radiometers measuring the balance between incoming and outgoing short- and long-wave radiation over 0.3-50 um, plus a four-component DPA266 for energy-balance research.

LSI-LASTEM-V-4 (1)

Soil

Waterproof 4-wire Pt100 Class A probe in AISI 304 stainless steel for burying at any depth or measuring surface and water temperature, calibrated in LSI’s ISO 17025 laboratory.

 

Buriable probes that measure volumetric water content and soil temperature using TDR (DQA340, analogue) or FDR capacitance (PRMPA1202, SDI-12), with no site calibration needed in mineral soils.

sensori-LSI-LASTEM-90

Single fibreglass probe with seven temperature points from 5 cm above the surface to 1 m depth, giving a complete soil temperature profile from one installation.

sensori-LSI-LASTEM-4

All-in-One Sensors & Weather Stations

A compact multi-parameter weather sensor combining sonic wind speed and direction, temperature, humidity, pressure and optionally solar radiation or rain in one Modbus-RTU unit.

Pre-configured complete weather stations built around the Alpha-Log data logger, with WMO-grade sensors for temperature, humidity, wind, solar radiation, pressure and rainfall in fixed or portable form.

ISMMA

Economical professional weather station kits that pair WMO-design sensors with the E-Log data logger and 3DOM software, offered with or without rain gauge and pyranometer.

AnyConv.com__LSI-LASTEM-V-1

Fixed or portable stations that continuously measure air temperature, humidity, globe and natural wet-bulb temperature and compute WBGT, Heat Index and UTCI, alerting by SMS, e-mail or local alarm.

istsa

Data Loggers

Rugged 16-bit data logger with 8 differential analogue inputs, 4 digital inputs and serial ports, built for meteorological, hydrological and air-quality stations with very low power draw.

 

Linux-based flagship data logger with up to 200 channels, built-in web server, 4G/Wi-Fi/Ethernet/satellite communications and MQTT, FTP and Modbus protocols, drawing only 0.03 W while logging.

sensori-LSI-LASTEM-30

Compact battery-powered logger for indoor microclimate, thermal comfort and IAQ surveys, with four analogue inputs, sensor auto-recognition and a built-in library of ISO 7730 and ISO 7243 calculations.

sensori-LSI-LASTEM-39

Noise & Soiling

Class 1 (IEC 61672-1) outdoor sound-level sensor measuring LAeq from 35 to 120 dBA with a 4-20 mA output, so noise can be logged alongside weather data on LSI or third-party loggers.

Optical soiling sensor that photographs a collection window to quantify transmission loss on photovoltaic modules with 1% accuracy, Modbus RTU output and no site calibration.

Particelle-di-terreno0

Water Level & Hydrology

Self-contained rain gauge station with Alpha-Log controller, solar power and 4G communications that measures rainfall intensity and storm distance and sends flood early-warning alerts when thresholds are exceeded.

Stainless-steel submersible pressure transmitters with flush ceramic diaphragm and vented cable for continuous 0-10 m water level measurement, 4-20 mA output, in 15 to 80 m cable lengths.

sensori-LSI-LASTEM-2024-03-27T113754.020

Non-contact 80 GHz radar level sensors for rivers, reservoirs and channels with 8, 15 or 30 m ranges, millimetre resolution and 4-20 mA or SDI-12 output, needing no maintenance.

sensori-LSI-LASTEM-2024-03-27T120305.790

Titanium four-electrode probes measuring conductivity from 5 to 100,000 uS/cm with temperature, and on the DQA420 water level to 11 m, via RS485 Modbus, SDI-12 or 4-20 mA.

sensori-LSI-LASTEM-2024-03-27T110601.070

Configurable early-warning station combining LSI rain gauges, radar or submersible level sensors and the Alpha-Log controller to raise SMS, e-mail and siren alarms when rainfall or river level thresholds are exceeded.

LSI-LASTEM-idrologia-1-755x1024-1-rd26p5e7xrulit4m3zwqu9lqsmy1dhfc5ck9jaxb2c