LSI LASTEM’s Class B pyranometers balance measurement quality and cost for weather networks and solar plants. The DPA154 is a passive thermopile sensor, while the DPA855 and DPA980 include signal conditioning with electrical isolation, giving a 4-20 mA loop or a galvanically isolated RS485 Modbus interface with programmable averaging. All are calibrated traceably to the WRR and housed in anodised aluminium.
- ISO 9060:2018 spectrally flat Class B; WMO good-quality level; IEC 61724-1 Class B
- Daily uncertainty 5% and flat spectral response from 285 to 3000 nm
- DPA154 microvolt output, DPA855 4-20 mA, DPA980 RS485 Modbus RTU and TTY-ASCII
- DPA980 provides instant, minimum, maximum and average values over 1-3600 s
- Electrically insulated electronics; 3 kV galvanic isolation on the DPA980
- Non-linearity under 1% and non-stability under 1% per year
- IP66 anodised aluminium housing with bubble level and radiation shield
- Recalibration recommended every two years
| ISO 9060:2018 class | Spectrally flat Class B (first class) |
| Accuracy (daily sums) | +/-5% |
| Spectral range | 285-3000 nm |
| Measuring range | 0-4000 W/m2 (DPA154); 0-1500 W/m2 (DPA855, DPA980) |
| Output | 10-15 uV/W/m2 (DPA154); 4-20 mA (DPA855); RS485 Modbus (DPA980) |
| Response time | 20 s |
| Power supply | 10-30 V AC/DC, 0.5 W (DPA855, DPA980) |
| Temperature response | under 2% (-15 to 35 C) |
| Operating temperature | -40 to 80 C |
| Protection | IP66 |
- PV plant monitoring (IEC 61724-1 Class B)
- Regional weather and agro-meteorological networks
- Building energy and solar thermal systems
- Environmental research