E-Log Environmental Data Logger (ELO3305 / ELO3305.1 / ELO3515)

E-Log is LSI LASTEM’s established field logger for outdoor environmental monitoring. It accepts analogue, pulse and serial sensors, stores raw or statistically processed values in 8 MB of circular memory, and computes a large library of derived quantities such as dew point, WBGT and evaporation. Data can be pushed to FTP servers over GPRS or read by Modbus masters, and the backlit display shows live readings and diagnostics in the field.
  • 8 differential (16 single-ended) analogue inputs plus 4 pulse or frequency digital inputs
  • Up to 99 channels combining measured, derived and calculated quantities
  • Acquisition and statistics intervals programmable from 1 s to 12 h per input
  • Modbus RTU master and slave, Modbus TCP via adapters, FTP push of ASCII files over GPRS
  • Serial sensor support for Gill, Biral, Lufft UMB, Boschung and Modbus-RTU devices
  • Seven switched power outputs to warm up sensors only when needed
  • Standby consumption under 4 mW for long battery or solar autonomy
  • Variants with two RS232 ports, RS232 plus RS485, or ZigBee 2.4 GHz radio
Analogue inputs8 differential / 16 single-ended, 18-bit ADC (16-bit effective)
Digital inputs4 (pulse, frequency up to 5 kHz, on/off)
Serial ports2 x RS232 (ELO3305); RS232 + RS485 (ELO3305.1); RS232 + ZigBee (ELO3515)
ChannelsUp to 99
Memory8 MB flash, circular
Acquisition rate1 s to 12 h
Switched outputs7, 1.1 A each
Power supply10-14 V DC (8-30 V DC per spec table)
Consumptionunder 4 mW standby, about 115-140 mW acquiring
Operating temperature-30 to 70 C; 242 x 108 x 80 mm, 720 g
  • Automatic weather stations
  • Hydrological and river monitoring
  • Air-quality and environmental networks
  • Indoor comfort and WBGT assessments
  • Industrial process monitoring