These W-band radar sensors measure water level from above the surface by timing short microwave pulses, so nothing is in contact with the water. That makes them the right choice where submersible probes struggle: fast currents, debris, overflow events or banks that are hard to reach. They are unaffected by condensation, dust or rapid temperature swings, and the PVDF body is rated IP66/68. Models cover 0-8, 0-15 and 0-30 m, with an SDI-12 variant for Alpha-Log.
- Non-contact 80 GHz radar measurement with 1 mm resolution
- Ranges of 0-8 m, 0-15 m and 0-30 m; accuracy down to 2 mm
- Narrow 4-10 deg beam for installation in confined channels
- 4-20 mA output (PRLVA3001/3002/3003) or SDI-12 (PRLVA3201)
- No maintenance; immune to condensation, dust and thermal gradients
- IP66/68 PVDF housing rated -40 to 80 C
- Low power: under 20 mA at 12-35 V DC, 1 min warm-up
- DYA044.2 lateral bracket gives 800 mm outreach from a 45-65 mm pole
| Principle | Radar, W band, 80 GHz, non-contact |
| Range | 0-8 m, 0-15 m or 0-30 m depending on model |
| Accuracy | +/-2 mm to +/-5 mm |
| Resolution | 1 mm |
| Beam angle | 4, 8 or 10 deg |
| Output | 4-20 mA (PRLVA300x); SDI-12 (PRLVA3201) |
| Power supply | 12-35 V DC, under 20 mA measuring |
| Operating temperature | -40 to 60/80 C |
| Housing | PVDF, IP66/68 (3 bar) |
| Cable / weight | 10 m, 1.7 kg |
- River and stream gauging
- Flood early-warning stations
- Reservoir and lake level monitoring
- Irrigation canals and weirs
- Storm-water and drainage systems