The DYI010 evaporimetric system follows the WMO Class A pan design used by meteorological services worldwide. A 1.2 m stainless-steel pan sits on a white plastic platform that limits heat gain, while a stilling well houses the DQC102 piezometric level sensor. The connected data logger converts level changes into evaporation and can switch a solenoid valve to top the pan up automatically.
- Class A pan built to WMO guidance in AISI 304 stainless steel with a 1.143 m2 evaporating surface
- Stilling well included to steady the water surface around the level probe
- DQC102 piezometric level sensor with 0-200 mm range and 4-20 mA output (RS485 Modbus-RTU via the MDMMA1010.1 interface)
- White plastic platform (DYI013) reduces solar heating of the pan
- Optional 12 V DC refill kit (DYI012) lets the logger top the pan up when the level falls
- Evaporation and related derived quantities calculated inside E-Log or Alpha-Log data loggers
- Connection cables available from 10 m to 100 m
| Pan standard | WMO Class A |
| Pan material | Stainless steel AISI 304, 2 mm |
| Evaporating surface | 1.143 m2 |
| Pan dimensions | Dia. 1207 mm x 254 mm high, 22 kg |
| Stilling well | Dia. 120 mm x 280 mm (included) |
| Level sensor | DQC102 piezometric, 0-200 mm |
| Level output | 4-20 mA (RS485 Modbus-RTU optional) |
| Level linearity / hysteresis | 0.1% FS / 0.03% FS |
| Sensor operating temperature | 0 to 50 C |
| Sensor power | 12 V DC, under 4 mA |
- Agro-meteorology and irrigation scheduling
- Synoptic and climatological weather stations
- Hydrological and reservoir water-balance studies
- University and research field sites