GHG Emissions

Greenhouse gas monitoring helps operators identify where emissions occur, quantify releases and check whether reduction measures are working. The gases of interest depend on the activity. Carbon dioxide (CO₂) is a focus at combustion plants and industrial facilities, methane (CH₄) at biogas plants, landfills and gas handling facilities, and nitrous oxide (N₂O) in applications such as wastewater treatment and some industrial processes.

What needs to be measured?

 Stack and process emissions. Fixed or portable multi-gas analysers can measure selected greenhouse gases in exhaust streams. Combining gas concentration with exhaust flow allows operators to calculate how much of each gas is released over time.

Methane leaks and process losses. Laser-based methane analysers can help locate leaks around pipework, valves and gas storage equipment. At biogas upgrading plants, measuring methane concentration and flow in the off-gas helps quantify methane slip, the methane that leaves the upgrader in the off-gas.

Ambient concentrations and weather. Monitoring upwind and downwind of a facility, alongside wind speed and direction, helps distinguish site-related peaks from background levels. Estimating an emission rate from these readings requires additional measurements or modelling.

Explore AQA’s range of fixed and portable multi-gas analysers, laser-based methane instruments and weather sensors below.

MCerts and TÜV Certified { EN 15267-4:2024 | EN 12619:2013 | QAL1 (EN 14181} the OneFID is a cutting-edge Heated Flame Ionization Detector (HFID) featuring a proprietary, patented injection system that allows for the simultaneous measurement of Total Hydrocarbons (THC), methane (CH₄), and non-methane hydrocarbons (NMHC) using a single detector. This innovative design simplifies system architecture, reduces operational complexity, and ensures exceptional measurement accuracy, long-term reliability, and full regulatory compliance for industrial emissions monitoring applications.

OneFID

Multicomponent FTIR gas analyser that quantifies many gases at once from a single infrared spectrum. 0.5 cm-1 resolution, 5 m optical path and heated cell options, offered in 19-inch rack, portable and wall-mounted versions.

download (36)

Tunable diode laser analyser for low-interference, low-ppm measurement of CH4, CO2, HCl and NH3. Available as wall-mount, 19-inch rack or portable, with heated sampling options for hot emission streams.

download (37)

RINA and IACS certified marine emissions monitoring system. A central analyser measures CO2 by NDIR and SO2 by UV-DOAS across every onboard boiler and engine stack, reporting the SO2/CO2 ratio in real time for MARPOL compliance.

ETG-7500

Drone-mounted methane analyser using a TDLAS laser sensor to map CH4 in ppm over pipelines, landfills and farms. Automated mission flights, 5G control and a ground station showing live gas and flight data.

download (43)