Submersible Piezometric Water Level Sensors (DQC001.15 / .30 / .50 / .80)

The DQC001 series measures water depth from the hydrostatic pressure above a ceramic thick-film sensor, referenced to atmosphere through a vented cable so barometric changes are cancelled automatically. The flush diaphragm resists fouling and is easy to clean, and the two-wire 4-20 mA loop connects to any logger or PLC. Four versions differ only in cable length, from 15 m to 80 m, for wells, rivers, tanks and reservoirs.
  • 0-10 m range with 0.25% FS accuracy and 0.5% FS long-term stability
  • Flush ceramic diaphragm resists solids build-up and simplifies cleaning
  • Vented PVC cable provides automatic atmospheric pressure compensation
  • Two-wire 4-20 mA output, 12-36 V DC supply, under 20 mA
  • Stainless-steel body with FKM seals; 2 bar overpressure tolerance
  • Thermal compensation over 0-70 C; operation from -10 to 70 C
  • Cable lengths of 15, 30, 50 or 80 m
  • Compatible with E-Log, Alpha-Log and third-party systems
PrinciplePiezometric, ceramic thick film, submersible
Range0-10 m
Accuracy0.25% FS (BFSL); under 0.5% FS (IEC 60770)
Long-term stability0.5% FS
Thermal driftunder 0.2% FS per 10 K
Overpressure / burst2 bar / 4 bar
Output4-20 mA, two-wire
Power supply12-36 V DC, max 20 mA
MaterialsStainless-steel body, ceramic sensor, FKM seals, PVC cable
Size / weightDia. 27 mm x 110 mm, 0.25 kg without cable
  • Groundwater and borehole monitoring
  • River and reservoir level
  • Flood warning stations
  • Tanks and treatment works
  • Evaporation pan level (with DQC102 variant)