Kunak AIR Pro

The Kunak AIR Pro is a sensor-based outdoor air quality station that combines up to five gas measurements with particulate matter, temperature, humidity and pressure in a single compact enclosure. Its plug-and-play smart cartridges can be swapped on site, and the unit streams data to the Kunak AIR Cloud platform over 2G/3G/4G or Ethernet. It is intended for local authorities, industry, ports, construction and research users who need near-reference quality data without a full reference station.
  • Patented plug-and-play smart cartridges: choose from 16 gas options and run up to five simultaneously alongside PM
  • Particulate sensor holds MCERTS certification for indicative PM1, PM2.5 and PM10 measurement
  • Sensors factory calibrated and tested against CEN/TS 17660 and US EPA sensor evaluation protocols
  • Remote baseline and span adjustment plus remote diagnostics through Kunak AIR Cloud
  • Built-in display for installation and on-site diagnosis; typical set-up time under 10 minutes
  • Runs autonomously from a 20 Ah lithium battery with optional solar panel or mains charger
  • Multi-band 2G/3G/4G, Ethernet and Modbus RTU communications with embedded eSIM and GNSS positioning
  • Supports up to six meteorological and noise probes (wind, rain, sound level, solar radiation, UV, WBGT)
  • Independently evaluated by US EPA, AIRLAB/Airparif, AQ-SPEC, SEDEMA and Ricardo
Gases availableCO, NO, NO2, O3, SO2, H2S, CO2, CH4, VOC, NMHC, NH3, HCl, HCN, HF, Cl2/ClO2, O2 (up to 5 at once)
ParticulatesPM1, PM2.5, PM4, PM10, TSP, TPC; optional ultrafine particle (UFP) sensor
Built-in sensorsTemperature, relative humidity, atmospheric pressure, dew point
CommunicationsMulti-band 2G/3G/4G, Ethernet, Modbus RTU slave; GNSS (GPS/GLONASS); embedded eSIM plus SIM holder
Power supply7-12 V DC from charger or solar panel; consumption 0.08-0.55 W depending on configuration
BatteryLithium 20 Ah; 9-20 days autonomy depending on configuration
Averaging / sending periodsAveraging 10 s to 24 h; data sending 5 min to 24 h
Operating conditions-40 to +60 C; 0-99 % RH; IP65
Dimensions / weight200 x 153 x 185 mm; under 2.3 kg
CertificationsCE, FCC, RoHS; MCERTS (PM sensor, certificate MC23041800-1)
  • Urban air quality networks with high spatial resolution
  • Industrial fence-line and odour monitoring
  • Wastewater treatment plants and landfill sites
  • Ports, airports and transport emissions
  • Construction and mining dust control
  • Research and consultancy studies
download (2)