The Hemera TP Analyser gives treatment works a dependable, low-cost way to track phosphate for chemical dosing control and discharge compliance. It uses a colorimetric method tuned for low reagent use, good selectivity and tolerance to modest turbidity, with results every one to five minutes. Automatic cleaning is available as an option, and the analyser is housed in a compact wall-mounted enclosure or an ATEX/IECEx explosion-proof version.
- Colorimetric total phosphate measurement with good selectivity
- 0.1 mg/L detection limit on the example 0–10 mg/L range
- ≤1 % FS accuracy and ±0.5 % FS repeatability
- Reading every 1 to 5 minutes
- Low reagent consumption reduces running costs
- Unaffected by low levels of turbidity
- Optional automatic cleaning cycle
- Wall-mounted or ATEX/IECEx explosion-proof enclosure with 4–20 mA, relay and Modbus outputs
| Parameter | Total phosphate (PO₄³⁻ / TP) |
| Measurement method | Colorimetry |
| Example range | 0–10 mg/L (custom ranges on request) |
| Accuracy | ≤1 % FS |
| Repeatability | ±0.5 % FS |
| Detection limit | 0.1 mg/L |
| Response time | 1–5 min |
| Enclosures | Wall-mounted (safe area); explosion-proof ATEX/IECEx Zone 1 or 2 |
| Outputs (L800 platform) | 4–20 mA isolated, programmable relays, RS485 Modbus |
| Power (L800 platform) | 100–240 VAC 50/60 Hz or 24 VDC, <20 W typical |
- Phosphorus removal and coagulant dosing control
- Wastewater discharge compliance
- Industrial effluent monitoring
- Eutrophication control in rivers and lakes
- Treatment process optimisation


