Hemera Multi-Parameter Air Quality Analyser – NOx / SO₂ / O₃ / BTEX / VOC

This configuration of the Hemera multi-parameter gas analyser bundles the key ambient air pollutants into one unit instead of a rack of separate instruments. NOx, SO₂ and O₃ are read by UV FTLS spectroscopy, BTEX by fluorescence and total VOC by PID, with all channels sharing one controller, one sample path and one set of outputs. Ranges are set to order, and the enclosure can be wall-mounted, rack-mounted or explosion-proof.
  • Up to eight gases in one compact enclosure; this configuration covers NOx, SO₂, O₃, BTEX and VOC
  • UV FTLS spectroscopy for NOx, SO₂ and O₃ with no consumables
  • Fluorescence detection for BTEX and PID for total VOC, integrated into the same unit
  • Ranges tailored to ambient or fence-line monitoring needs
  • Single 8.5-inch touchscreen controller with 4–20 mA, relay and Modbus RS485 outputs
  • Smaller footprint and simpler installation than separate analysers
  • Wall-mounted, 19-inch rack or ATEX/IECEx explosion-proof enclosures
  • Optional automatic calibration
  •  
Typical parametersNOx (NO, NO₂), SO₂, O₃, BTEX, VOC
Maximum channelsUp to 8 parameters per enclosure
Measurement methodsUV FTLS spectroscopy; fluorescence (BTEX); PID (VOC)
Measurement rangesCustomised on request
EnclosuresWall-mounted or 19″ rack (safe area); explosion-proof ATEX/IECEx Zone 1 or 2
Standard enclosure sizes430×340×195, 570×340×195 or 900×340×195 mm, SS316L, IP54 (IP65 optional)
Display8.5″ TFT colour touchscreen
Outputs4–20 mA isolated, programmable relays, RS485 Modbus
Power100–240 VAC 50/60 Hz or 24 VDC, <20 W typical (60 W max)
Operating conditions5–45 °C, <90 % RH
  • Urban and roadside air quality stations
  • Industrial fence-line monitoring
  • Petrochemical and refinery perimeter BTEX monitoring
  • Environmental research and reporting
  • Public health and regulatory compliance
  •