The Hemera NH₃ Analyser quantifies gaseous ammonia with a UV FTLS spectrometer that reads the gas optically, so nothing is consumed and the sample is not altered. The method is highly selective, ignoring CO, CO₂, methane, moisture and unknown background gases, and it responds within ten seconds. It is available in wall-mounted, 19-inch rack and ATEX/IECEx explosion-proof enclosures, with optional automatic calibration for low-maintenance continuous operation.
- UV FTLS spectroscopy with no cross-sensitivity to CO, CO₂, CH₄, humidity or unknown gases
- Response time of ten seconds or less for tight process control
- 0.5 ppm detection limit on the example 0–100 ppm range
- Non-destructive optical measurement with no reagents or consumables
- Optional automatic calibration
- Wall-mounted, 19-inch rack or ATEX/IECEx explosion-proof enclosures for Zone 1 or 2
- 8.5-inch colour touchscreen controller with 4–20 mA, relay and Modbus RS485 outputs
- Two-year parts and labour warranty
| Parameter | NH₄⁺ (ammonium) |
| Measurement method | Gas-phase UV FTLS spectroscopy |
| Example range | 0–100 mg/L (custom ranges on request) |
| Accuracy | ≤1 % FS |
| Repeatability | ±1 % FS |
| Detection limit | 0.1 mg/L |
| Response time | ≤1 min |
| Reagent consumption | <1 mL per measurement |
| Maintenance interval | Every 6 months |
| Enclosures | Wall-mounted L800 (safe area); explosion-proof ATEX/IECEx Zone 1 or 2 |
- Aeration control in activated sludge plants
- Wastewater inlet and discharge monitoring
- Industrial effluent treatment
- Anaerobic digester supernatant and sludge liquor
- Surface water and environmental monitoring


