Class B Pyranometers (DPA154 / DPA855 / DPA980)

LSI LASTEM’s Class B pyranometers balance measurement quality and cost for weather networks and solar plants. The DPA154 is a passive thermopile sensor, while the DPA855 and DPA980 include signal conditioning with electrical isolation, giving a 4-20 mA loop or a galvanically isolated RS485 Modbus interface with programmable averaging. All are calibrated traceably to the WRR and housed in anodised aluminium.
  • ISO 9060:2018 spectrally flat Class B; WMO good-quality level; IEC 61724-1 Class B
  • Daily uncertainty 5% and flat spectral response from 285 to 3000 nm
  • DPA154 microvolt output, DPA855 4-20 mA, DPA980 RS485 Modbus RTU and TTY-ASCII
  • DPA980 provides instant, minimum, maximum and average values over 1-3600 s
  • Electrically insulated electronics; 3 kV galvanic isolation on the DPA980
  • Non-linearity under 1% and non-stability under 1% per year
  • IP66 anodised aluminium housing with bubble level and radiation shield
  • Recalibration recommended every two years
ISO 9060:2018 classSpectrally flat Class B (first class)
Accuracy (daily sums)+/-5%
Spectral range285-3000 nm
Measuring range0-4000 W/m2 (DPA154); 0-1500 W/m2 (DPA855, DPA980)
Output10-15 uV/W/m2 (DPA154); 4-20 mA (DPA855); RS485 Modbus (DPA980)
Response time20 s
Power supply10-30 V AC/DC, 0.5 W (DPA855, DPA980)
Temperature responseunder 2% (-15 to 35 C)
Operating temperature-40 to 80 C
ProtectionIP66
  • PV plant monitoring (IEC 61724-1 Class B)
  • Regional weather and agro-meteorological networks
  • Building energy and solar thermal systems
  • Environmental research