DYI010 Class A Evaporation Pan System (Evaporimeter)

The DYI010 evaporimetric system follows the WMO Class A pan design used by meteorological services worldwide. A 1.2 m stainless-steel pan sits on a white plastic platform that limits heat gain, while a stilling well houses the DQC102 piezometric level sensor. The connected data logger converts level changes into evaporation and can switch a solenoid valve to top the pan up automatically.
  • Class A pan built to WMO guidance in AISI 304 stainless steel with a 1.143 m2 evaporating surface
  • Stilling well included to steady the water surface around the level probe
  • DQC102 piezometric level sensor with 0-200 mm range and 4-20 mA output (RS485 Modbus-RTU via the MDMMA1010.1 interface)
  • White plastic platform (DYI013) reduces solar heating of the pan
  • Optional 12 V DC refill kit (DYI012) lets the logger top the pan up when the level falls
  • Evaporation and related derived quantities calculated inside E-Log or Alpha-Log data loggers
  • Connection cables available from 10 m to 100 m
Pan standardWMO Class A
Pan materialStainless steel AISI 304, 2 mm
Evaporating surface1.143 m2
Pan dimensionsDia. 1207 mm x 254 mm high, 22 kg
Stilling wellDia. 120 mm x 280 mm (included)
Level sensorDQC102 piezometric, 0-200 mm
Level output4-20 mA (RS485 Modbus-RTU optional)
Level linearity / hysteresis0.1% FS / 0.03% FS
Sensor operating temperature0 to 50 C
Sensor power12 V DC, under 4 mA
  • Agro-meteorology and irrigation scheduling
  • Synoptic and climatological weather stations
  • Hydrological and reservoir water-balance studies
  • University and research field sites