Surface Temperature Sensor (DLE124A)

The DLE124A surface temperature sensor houses a Class AA Pt100 element in a thin plate that sits flush against the surface being measured. It is small enough for tight spaces, robust enough for permanent outdoor installation, and uses a 4-wire connection so it can be run over long cables to a data logger. Converters add 4-20 mA or RS485 Modbus output where needed.
  • Flat plate design for good thermal contact with the measured surface
  • Pt100 Class AA (1/3 DIN B) element, 0.1 °C accuracy
  • 4-wire wiring for long cable runs without loss of accuracy
  • Mounts with silicone, adhesive tape or thermally conductive paste
  • Rugged construction for outdoor use on PV panels and structures
  • Optional accessories for 4-20 mA and RS485 Modbus output
  • Calibrated in LSI’s ISO/IEC 17025-accredited laboratory
ModelsDLE124A, DLE124A.1, EST124
Sensing elementPt100 Class AA, 4-wire
Accuracy0.1 °C (0.15 °C at 0 °C on earlier DLE124)
Resolution (with LSI logger)0.01 °C
Operating temperature-40 to +80 °C
Response time T90approx. 35 s (in water, DLE124)
OutputPt100 (DIN-IEC 751 table); 4-20 mA / RS485 via converter
ConnectionFree wires (DLE124A) or Mini-DIN connector (EST124)
  • Photovoltaic module temperature monitoring
  • Building envelope and facade studies
  • Floor and wall temperature for thermal comfort
  • Industrial process surfaces