The ETG 8900 BIO LNG is a multicomponent gas analyser built for biomethane liquefaction plants, where carbon dioxide and moisture must be held at very low levels to protect cryogenic equipment and product quality. It uses photoacoustic spectroscopy to measure CO2 and H2O down to sub-ppm concentrations, continuously and with minimal drift. The gas path is kept separate from the sensing elements to reduce maintenance.
- Photoacoustic measurement of CO2 and H2O at trace levels
- Detection limits of 1 ppm for CO2 and 0.2 ppm for water vapour
- Gas stream isolated from the sensors to minimise maintenance
- 5.7-inch touchscreen with straightforward setup and calibration
- Remote monitoring and control for real-time oversight
- Stainless steel wall-mounted enclosure rated IP55
- 4-20 mA output as standard, other industrial protocols optional
| Measured gases | CO2 and H2O |
| Technology | Photoacoustic spectroscopy |
| CO2 range | 1 to 4000 ppm (detection limit 1 ppm) |
| H2O range | 0.2 to 1000 ppm (detection limit 0.2 ppm) |
| Precision | Better than 1% |
| Display | 5.7-inch touchscreen |
| Enclosure | Stainless steel, wall-mounted, IP55 |
| Power | 100-240 VAC, 50/60 Hz, approx. 30 W |
| Connections | USB, Ethernet, 4-20 mA (other protocols optional) |
| Dimensions / weight | 90 x 75 x 40 cm, approx. 20 kg |
- Biomethane liquefaction (bio-LNG) plants
- LNG quality control
- Biomethane upgrading
- Biogas system integrators
- Research centres


