- Available in 4 channels, 8 channels, 32 channels and 128 channels
- FCS-M models offer Modbus® RTU RS-485 digital output signal for LAN and WAN communications
- FCS-B models offer BACnet® MS/TP RS-485 output signal for WAN communications (for communicating with a BAS)
- Graphic, full colour, touchpad LCD screen with LED indicators
- Intuitive menu system with password protection
- Optional internal analog inputs and/or analog outputs with flexible configuration settings
- Enhanced logic control, zoning and priority structure capabilities
- Supports 4-20 mA and Modbus® driven VFDs
- 4 dry contact relays, 5A @ 240V each
- 2 dedicated horn/strobe output drives, 0.5A @ 24VDC max
- Line Voltage (90 – 240 VAC)
- USB port for firmware upgrades and data logging
- Configurable to comply with California Title-24 Energy Efficiency Standards
- Door mounted audible alarm, optional water tight version available
- Standard water / dust tight, corrosion resistant enclosure (drip proof); IP54 rated with water tight, door mounted audible alarm installed
Enclosure: ABS / Polycarbonate, copper coated interior to reduce RF interference
IP54 rating with door mounted, water tight buzzer installed
Size: 254 x 226 x 113 mm / 10.0 x 8.9 x 4.44 in
Display: 8.1 cm (3.2”) graphic, 1/4 VGA full colour resistive touch LCD screen with LED indicators for “POWER”, “STATUS 1, 2 and 3” and “FAULT”
Input: Modbus® RTU RS-485 input
4-20 mA analog input (optional)
Output: Modbus® RTU RS-485 output to networked devices
Modbus® RTU RS-485 output to BAS or DDC (FCS-M models)
BACnet MS/TP RS-485 output to BAS or DDC (FCS-B models)
2 outputs drives for strobe/horn, 0.5 A @ 24 VDC max
Field configurable 4-20 mA or 0-10 volts analog output (optional)
Audible Alarm: Standard loud, door mounted buzzer, 90 dB @ 30 cm (1 ft)
Optional: door mounted, water tight buzzer, 85 dB @ 60.96 cm (2 ft)
Top Mounted Strobe: Optional: bright, red, top mounted strobe, 10 – 30 VDC, 13 cm H x 6.1 cm dia / 5.2 inches H x 2.4 inches dia
Power Requirement: Line Voltage: 90 – 240 VAC, 50 -60 Hz, 75 W
Power Distribution: Total power available for Remote & Peripheral Devices and Options 65 W @ 24 VDC
Operating Temperature: -20°C to 40°C (-4°F to 104°F)
with internal heater
-40°C to -40°C (-40°F to 104°F)
Conforms to: CSA-C22.2 No. 205-12, UL508 (Edition 17):2007
EMC Directive 2004/108/EC, EN 50270:2006, Type 1, EN61010
FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCS-B, FCS-B-X models are Listed by BTL (where X represents one or more factory installed Options)
RoHS compliant circuit boards
- Enclosed Parking Facilities
- Recreation Facilities
- Food Processing Plants
- Cold Storage / Freezer Rooms
- Refrigeration Plants
- Chemical Storage Rooms
- and many more…
