- Oxygen sensor 0 – 25% volume (3 year lifespan)
- 2×16 character LCD display with LED indicators
- One 5A SPDT dry contact relay
- One configurable 4- 20 mA output
- Sample draw pump
- Adjustable flow meter
- Blocked flow alarm
- Loud side mounted buzzer
- Standard water / dust tight, corrosion resistant enclosure (drip proof)
Gas Sensor: Oxygen (O2) (measurement range 0 – 25% vol)
Enclosure: Water / dust tight corrosion resistant polyester reinforced fiberglass
Weight: 3.4 kg / 7.5 lbs
Tygon Polymer Tubing (sold separately): 1/8″ ID x 1/4″ OD, clear, 15.24 m / 50 ft roll sold separately (p/n: CET-8000-CMT)
Display: 2×16 character LCD display
LED indicators for “CH1” state, “CH2” state and “FAULT”
Audible Alarm: Side mounted buzzer, rated 90 dB @ 30 cm / 1 ft
Flow: Normal operation: 1.0 LPM
Flow alarm: less than 0.5 LPM
Power Requirement: 24 VAC nominal, 10 W, Class 2
Location: Indoor use only
Conforms to: CSA-C22.2 No. 205-12, UL508 (Edition 17):2007
EMC Directive 2004/108/EC, EN 50270:2006, Type 1, EN61010
FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RoHS compliant circuit boards
- Magnetic Resonance Imaging (MRI) Rooms
- Nuclear Magnetic Resonance (NMR) Labs
- Transmission Electron Microscope (TEM) Rooms
- Freezer Farms (medical)
- and many more…
