- Output 30 SLPM at 35 psig (requires high flow filter)
- Condensate/purge valve that operates both automatically and manually to drain
- Front panel pressure gauge
- Front panel adjustable pressure gauge
- Front panel purge switch
- Automatic control via contact control or a switched low voltage DC power source
- Internal permeation dryer
- Clear View Media canisters for removal of NO, NOx, NO2, SO2, H2S, NH3, & O3
Output Concentration | NO, NO2, SO2, H2S O3 | < 0.025ppb < 0.3ppb |
With CO oxidizer | CO | < 10ppb |
With CO oxidizer | NH3 HC | < 0.10ppb < 0.20ppb |
Compressor | Internal, Dual-piston, oil-less, long life pump | |
Mechanical | 8.75″ x 16.2″ x 22.25″ (22.2cm x 41.2cm x 56.5cm | |
Weight | 55lbs. standard unit 65lbs. with HC oxidizer | |
Electrical | 110V-120V, 60 Hz or 220V-240V, 50/60 Hz | |
Communication
| 1 x Ethernet: 10/100Base-T (optional) 1 x RS232 (115,200 baud rate) Modbus or ML protocol (optional) | |
Dewpoint | -20ºC up to 15 SLPM/-10ºC above 15 SLPM | |
Operating Temperature | 5 – 40ºC | |
Standard Warranty | Two year | |
For more specification details refer to data sheet (under downloads)
The Model 1001C Zero Air Source is designed to
meet the requirements for clean-dry air when
used by a dilution calibrator, purge air for
permeation tube ovens, supply air for test
chambers, and pollutant free air for other
laboratory or environmental applications.
