- Rugged construction, IP55 cabinet
- High sensitivity through Micro-Electro-Mechanical Systems (MEMS) microfluidic pre-concentrator and a miniaturized Photoionization Detector (PID
- Carrier gas-free simplifies installation and reduces running costs
- Small and light weight easy to move, enabling monitoring in every condition: fixed network, on-the-go analysis, emergency events, and focused hot spot campaigns.
- Automatic analysis with auto check and auto calibration
- Remote control and Cloud software (Pollution Guardian) with real-time data
- Low maintenance cost and low energy consumption
Dimensions | 420mm x 620mm x 210mm |
Weight | Models: W0E – 11,5 Kg WCE (auto-check) – 13 Kg WBE (UPS) – 17,5 Kg WEE (auto-check+UPS) – 19 Kg |
Operating Temperature | From -40°C to 50°C |
Instrument control | Integrated PC board |
Data storage | 16 GB Internal Flash Memory (up to 7 years of continuous measurements) |
Power Input | 100-240VAC, 50-60Hz |
Power absorption | UPS & batteries version: 25W (40W peak) with charged battery – during charging fase 50W (65W peak) No UPS & battery version: 25W (40W peak) |
Carrier gas | Ambient Air, <10sccm |
Sampling | Sample Flow Rate 250 – 450 sccm |
Detector | High-sensitivity PID – Photo Ionization Detector (10,6 eV) |
Analysed Gases | Benzene, Toluene, Ethylbenzene, Xylenes (other gases on request) |
Standard analytical range | 1-200 ppb (benzene) with 10 min analysis cycle |
Customised analysis methods | Additional analytical methods available upon request |
Weather control unit (optional) | Wind speed and direction, barometric pressure, relative humidity, air temperature and solar radiation |
Communication interfaces | Ethernet, Wi-Fi, 4G |
Instrument control and data access | -Local WebServer, accessible with a common browser (IE, Firefox, Chrome) – MODBUS su TCP server. – IoT service “Pollution Guardian”
|
- Environmental Monitoring: Ideal for urban air quality assessments, industrial perimeter monitoring (fenceline), and emergency response scenarios.
- Compliance Monitoring: Assists in meeting environmental regulations and standards, such as the EN14662-3:2015 for ambient air quality.
- Industrial Facilities: Suitable for deployment in oil & gas plants, chemical depots, waste management sites, and other facilities where BTEX emissions are a concern
